Precision-turbo-and-engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & Instrukcja Użytkownika Strona 63
- Strona / 122
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
BigStuff3 Pro SEFI System (LS1)
Version 1.0 62
• Interpolate – If a series of cells in the same row are selected and the “Interpolate” “cell-
fill” option is selected the ECU will use the value in the cell all the way to the left and the
cell value all the way to the right and interpolate the numbers in between so that the
values are linear.
Cell Values Selected in a Row
70 70 70 80
Interpolated Result from Cell Values Selected Above
70 73 77 80
If a series of cells in the same column are selected and the “Interpolate” “cell-fill” option is
selected the ECU will use the value in the cell all the way at the bottom and the cell value all the
way at the top and interpolate the numbers in between so that the values are linear.
Cell Values Selected in a Column
90
80
70
70
70
Interpolated Result from Cell Values Selected Above
90
85
80
75
70
If a range of cells (multiple rows and columns) are selected and the “Interpolate” “cell-fill”
option is selected the ECU will use the value in the cells at the bottom left and top left corners,
bottom left and bottom right corners and the bottom left and top right corners of the entire range
and interpolate the numbers in between so that the values are linear.
Range of Cell Values Selected
80 80 80 80
80 80 80 80
80 79 77 80
77 77 75 80
Interpolated Result from Range of Cell Values Selected Above
80 80 80 80
79 80 80 80
78 79 80 80
77 78 79 80
• Cancel – Hit cancel to disregard making any changes.
Cell
value to
the left
Cell
value to
the left
- BigComm Software 1
- User Instruction Manual 1
- Table of Contents 2
- Table of Contents Continued 3
- 1. Introduction 3
- 3. Package Contents 6
- Firewall grommet 7
- LS1 In-line, 1-by-4, IAC 14
- Connector Pin-out 14
- IAC Coils 14
- Late Model 2-by-2 IAC 14
- Pin-Out 15
- WBO2 & 16
- Coil V-Batt 16
- 30 Amp fuse 16
- WBO2 & Coil V-Batt Relay 16
- 7. ECU Installation 19
- 8. BigComm Software Overview 19
- BigComm software CD ROM 20
- BigComm 24
- 11. Using the Tool Bar 25
- BigComm desktop icon 26
- 13. BigComm Main Menu Screen 30
- 15. Closing Windows 30
- 16. Configuration 31
- 17. Hardware Configuration 31
- For setup detail go to 33
- Coil-on-Plug (COP) 33
- Crank_Reference_Setup 33
- TPS Signal in the Dash 34
- 19. Dwell Time Table 38
- 20. Load vs. RPM 40
- 21. Firing Order 44
- 22. Injector Opening Time 44
- 23. Injector Phase Angle 45
- 25. Air Fuel Ratio Table 48
- 26. Positive 02 Correction 52
- 27. Negative 02 Correction 53
- 30. SPARK (F4 – “Quick Key”) 56
- 31. Spark Table 57
- 32. FUEL (F3 – “Quick Key”) 60
- 33. Fuel Table 61
- 34. STARTING 64
- 36. After Start Delay 66
- 37. After Start Correction 67
- 38. After Start Decay 68
- 39. Idle 69
- 40. Throttle Follower 70
- 41. Desired Idle RPM 71
- 42. Idle Spark 71
- 43. IAC Start Position 72
- 44. IAC Gain Terms 73
- 45. Warm Up 74
- 48. TRANSIENT FUEL 76
- 51. MAP AE Decay Rate 79
- 52. MAP AE Inc Rate 80
- 53. Run Time Correction 81
- 54. dMAP Parameters 82
- 55. dTPSdt 84
- 56. AE Position Correction 85
- 57. Individual Cylinder 86
- 60. Boost 88
- 61. Boost Parameters 89
- 62. Boost PWM 90
- 63. Boost Staged 91
- 65. Learning 94
- 67. Learning Display Table 95
- 68. Dash 96
- 69. Configure Dash 96
- 70. Save a Dash 99
- 71. Load From File 101
- 72. Save to File 102
- 73. Logging (External) 104
- 74. Configure Log 105
- 76. View Log from File 106
- Red cursor 109
- 79. Configure Replay 111
- 80. Upload 112
- 81. View Replay From File 113
- Blue Ellipse represents the 116
- 85. Load Calibration 118
- To set up, go to Gear_Box 120
- To set up, go to Gears 120
- 87. Acronym Definition 121
- 88. Control Keys 121
- 89. Function or “Quick Keys” 121
- 90. Definitions 121
- 91. ECU Pin-out 122
Powiązane produkty i podręczniki dla Do samochodu Precision-turbo-and-engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware &
Do samochodu Precision-turbo-and-engine NLR AMS-500 Boost Controller Instrukcja Użytkownika
(8 strony)
(8 strony)
Do samochodu Precision-turbo-and-engine NLR AMS-1000 Boost Controller Instrukcja Użytkownika
(25 strony)
(25 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji